Model G High Profile Type
Roofing material: Solid polycarbonate sheets
Frame: Aluminium profile
Sizes: Customized sizes according to requests
- 15 years warranty
- Improve pool safety
- Reduce maintenance cost
Model G Pool Enclosure



Light transmittance of Solid polycarbonate sheets rates up to 85%-91%, and the transparency can be comparable with glass.
Polycarbonate panel is 250-300 times as common glass, 2 times as toughened glass. Enjoying the reputation of "safety glass" and "ring steel".
There are anti-UV coatings on surface of Solid PC Sheets which can protect your skin from damage rays.
6063 T5 Aluminium Frame
Extruded 6063 aluminium is high wind pressure and corrosion resistance. Anodized aluminium has an oxidation layer on the surface. So the aluminium is high corrosion resistance in seawater, the corrosion rate less than 0.018mm/Y in sea water.

Model G Features

It is not sharp on top , safe and comfortable to walk over. They would not hurt feet.

Stand pool covers have a front door with brush under door panel.

Under-ground lock on front door and locks between sections, so no worry about wind will blow away it.

We provide 10 year warranty on Panel and equipment accessories, and 15 year warranty on aluminium.
Wind & Snow pressure Test


1 Design

2 Material: Panel material : 3mm /4mm thick Polycarbonate solid sheets
Light transmittance:
The light transmittance rates up to 85%-91%, and its transparency can be comparable with glass.
High impact resistance:
The impact strength of polycarbonate board is 250-300 times as common glass, is 2 times as toughened glass.
You can image, falling the hammer with 3kg from two meters above the polycarbonate, there is no crack.
The polycarbonate enjoy the reputation of “safety glass” and “ring steel”. So, it greatly reduce the maintenance cost and liability risk comparing with other glazing materials.
Anti- UV protection:
We add anti-UV coatings on the surface of sheets, and it can protect your skin from skin cancer. It is also anti-aging.
Frame material: 60mm*100mm 6063 aluminium alloy
Extruded 6063 aluminium is high wind pressure,corrosion resistance and is widely used as the frame of architectural ( windows and doors), curtain walls.
The aluminium was anodized, has an oxidation on the surface. The coating as a shield, it prevent corrosive media (such as salt water,salt mist, corrosive glass, etc) from the metal. So the aluminium is high corrosion resistance in seawater, the corrosion rate less than 0.018mm/Y in sea water.
3 Sizes : Depending on your swimming pool size
4 Tracks:
5 Front Sliding door as below picture showed
Usually our standard pool cover has a sliding door as the below picture showed:
6 Side sliding door as below
If you want to add a side sliding door, we can also customize one for you.
Side sliding door can be located at A,B,C or D panel as below,( extra USD 180 as side sliding door customized cost)
7 Lock systems
There are lock system between sections, it will be fixed well, no worry wind will blow it away.
8 Installation
There are detailed installation manuals which can guide you to complete the installation.
If necessary, our engineer can also give you some video or telephone guidance.If it is still difficult for you, our related workers or dealer can install it for you on site, but you may need to bear the necessary cost.
9.Wind and snow pressure tests
We construct our enclosures from solid polycarbonate sheets and extruded aluminium, these outdoor pool covers can withstand a wind speed 230km/hr and a weight equivalent to 900kg distributed with in a 1.5m radius.
You don’t have to worry about wind and snow any more and you will have a safety pool cover all year round.